NEWS

Survive by quality, promote development by science and technology

Check category

What is the difference between aluminium forging and aluminium die casting?

  • Categories:Industry News
  • Author:
  • Origin:
  • Time of issue:2019-05-21 11:23
  • Views:

(Summary description)Aluminium forging is mainly used for forging aluminium alloys. Die-cast aluminium alloys are cast aluminium alloys, but are mainly used for die-cast aluminium alloys.

1

1

1

1

What is the difference between aluminium forging and aluminium die casting?

(Summary description)Aluminium forging is mainly used for forging aluminium alloys. Die-cast aluminium alloys are cast aluminium alloys, but are mainly used for die-cast aluminium alloys.

  • Categories:Industry News
  • Author:
  • Origin:
  • Time of issue:2019-05-21 11:23
  • Views:
Information

Aluminium forging is mainly used for forging aluminium alloys. Die-cast aluminium alloys are cast aluminium alloys, but are mainly used for die-cast aluminium alloys.

Forged aluminium alloys include A1-Si-Mg-Cu alloys and A1-Cu-Ni-Fe alloys. Commonly used forged aluminium alloys include LD2.LD5.LDL0 etc. They contain a variety of alloying elements, but in small amounts. They have good thermoplasticity and therefore have good forging properties and good mechanical properties. These alloys are mainly used to carry die-forged parts and some forgings with complex shapes.

Cast aluminium alloys are divided into four categories: A1-Si, A1-Cu, Al-Mg and Al-Zn. For casting aluminium alloys, in addition to the necessary mechanical properties and corrosion resistance, they should also have good casting properties. Among the cast aluminium alloys, the A1-Si alloy, also known as Si-Almin, has good casting properties and mechanical properties.

Scan the QR code to read on your phone

Previous: Crusher hammer head casting and forging process, what is the difference?
Next: None
Previous: Crusher hammer head casting and forging process, what is the difference?
Next: None
Forging

Forging processes according to their modal movement

Forgings are deformed during the cold forging process and are work-hardened so that the forging die is subjected to a large load. For this reason, high strength forging dies are required, with hard lubricating films to prevent wear and bonding. In addition, intermediate annealing is required to prevent cracking of the blank to ensure the required deformation capacity.
2022-03-16
Sintering

Sintering furnaces: Titanium alloy casting process characteristics

The purpose of casting deformation of titanium and titanium alloys is, firstly, to obtain a design that meets the requirements of
2022-03-16
Forging

Forging process for large aluminium alloy forgings

Large forgings are generally used in the key parts of large machinery. Due to the poor working environment and complex and variable forces, large forgings have high quality requirements in the production process. Large forgings are forged directly from ingots. In the production of large forgings, even with advanced metallurgical technology, there are inevitably micro-cracks, looseness, shrinkage, segregation and other defects inside the ingot, which seriously affect the quality of the forgings. In order to eliminate these defects and improve the quality of forgings, the forging process must be improved and reasonable forging process parameters must be selected.
2022-03-16
What

What is the difference between forged and cast wheels?

The difference between forged and cast wheels is the way in which they are produced and processed: forging is the use of a steel mould in which a heated and softened aluminium block is placed, shaped by stamping and then machined after it has cooled; casting wheels are made by casting molten aluminium in a sand mould and then machined after it has cooled and shaped. Forging is a processing method that uses forging machinery to apply pressure to a metal billet, causing it to deform plastically in order to obtain forgings with certain mechanical properties and a certain shape and size. Casting wheels are barrel-shaped metal parts with an inner profile that support the tyre and are mounted on the shaft at the centre.
2022-03-16
上一页
1
2

 Copyright Suzhou Baoye Forging Co., Ltd.  苏ICP备10089019号-1  Powered by www.300.cn  SEO

Page Copyright Suzhou Baoye Forging Co., Ltd.

 苏ICP备10089019号  

Powered by www.300.cn